LTEQ MICROWAVE

Diviseurs de Puissance
Résistifs

* Reactive High Power Dividers

Reactive power dividers are generally used in the systems that do not need high output isolation and return loss. But they provide very good input return loss and very low insertion loss. They can handle average RF power up to 500 W depending on the specific application.

* High Power Dividers With High Isolation

Unlike the Reactive power dividers, power dividers in this category provide very high output isolation and very good VSWR when used for the high power signal splitting or combining. Higher than 3-way or broadband models are available upon request.

* Extreme High Power Combiner With High Isolation

This high power combiners offer very high isolation for the combining channel to prevent the mutual interference between the combined signals. With high power termination integrated internally, the unit can dissipate very high power when mounted on the proper heat sinking. Other frequency band and other combining ways are available upon request. When the unit is used as power divider, it can withstand the specified power rate when the outputs are open or short at any phase difference.

Clear Microwave designs broadband resistive power dividers up to 40 GHz. These dividers utilize 3 resistors to provide good input and output source matching in ratio measurements and leveling applications.